Empire Tahoe Clean Face Deluxe 32" Direct Vent Gas Fireplace - IP Control 

The Empire Tahoe Clean Face Deluxe 32" Direct Vent Gas Fireplace - IP Control  feature our Contour tube-style burner, designed to complement the hand-painted ceramic fiber log set, and produce a natural dancing flame.

The Empire Tahoe Clean Face Deluxe 32" Direct Vent Gas Fireplace comes with a discreet air distribution channel that eliminates the look of louvers, yet still allows you to operate the optional blower.  It features a large heat-resistant, tempered glass window that provides an unobstructed view to the log set.

Choose an optional liner – Aged Brick, Herringbone, Stacked Limestone, or Black Reflective – to customize your fireplace.

Empire Tahoe Clean Face Deluxe models require 17-3/4" of depth, and  use 4 x 6-5/8 venting, making them ideal for applications where wall-cavity space is tight.

Designed for in-wall installation, your Tahoe Direct-Vent fireplace can be finished with tile or other non-combustible material, which conceals the outer edge of the fireplace to provide a true built-in appearance.

Includes: 7 Ceramic fiber logs, On/Off Switch (Battery Backup and AC Adapter) and Barrier Screen.

Designed for in-wall installation, your Tahoe Clean-Face Direct-Vent fireplace can be finished with tile or other non-combustible material, which conceals the outer edge of the fireplace to provide a true built-in appearance.

Features

• Tempered Glass: 20 x 27 1/2
• Top or Rear Vent, Venting: 4 x 6 5/8 
• Framing: 39 H x 35 1/4 W x 18 D
• Ignition: Intermittent Pilot Ignition
• Overall Dimensions: 34-9/16" (W) x 17-3/4" (D) x 35.62" (H)
• Optional Liners
• 7-piece Ceramic Log Set Included
• Optional Remotes
• Weight: 96.00 lbs

What to Order With It

The log set is included with the fireplace. Apart from venting, everything below is optional.

Required (venting, order separately):

• Top or Rear Vent, 4 x 6 5/8. See the installation manual for vent kits and limits.

Optional – Remotes and wall controls:

• Remote, Battery Receiver/Remote, On/Off (FRBC)
• Remote, Battery Receiver/Remote, Thermostat (FRBTC2)
• Remote, Electric Receiver/Battery Remote, On/Off (FREC)
• Remote, Battery Receiver/Remote, TouchScreen, Programmable (FRBTPS)
• Wall Switch, On/Off (FWS1)
• Wall Thermostat, Reed Switch (TMV)
• Wall Thermostat, Wireless (TRW)

Optional – Variable remote kit (IP models):

• Remote, Var Flame Kit, NG (RVKN)
• Remote, Var Flame Kit, LP (RVKP)

Optional – Accessories:

• Blower, Auto (FBB4)
• Flex Gas Line, 24-in. Stainless Steel (GF24)
• Platinum Embers (PE20)
• Ember Kit (EK1)

Optional – Liners:

• Liner, Aged Brick (DVP1SA)
• Liner, Stacked Limestone (DVP1SG)
• Liner, Black Porcelain (DVP1SKR)
• Liner, Herringbone Brick (DVP1SH)

Optional – Gas conversion kits:

• Conversion Kit, IPI (NG To LP) (32880)
• Conversion Kit, IPI (LP To NG) (32881)

Installation Requirements

• Clearances to combustibles: Back 0", sides 0", floor 0", top standoffs 0", top framing edge 0"; minimum 41" from top of canopy to ceiling; 6" from side of fireplace to an adjacent side wall
• Mantel clearance: Follow the mantel chart in the installation manual for any combustible mantel above the unit.
• Venting: 4" x 6-5/8" direct vent, top or rear; maximum 40 ft vertical and 20 ft horizontal (see the venting graphs in the installation manual for allowed combinations)
• Gas input (BTU/hr): Natural gas 18,000 max / 14,000 min; propane 18,000 max / 14,000 min
• Power: Intermittent pilot models (FP70, FP71) ship with 4 AA batteries and an AC power adapter. The blower requires 120V, 60Hz, 1 amp.
• Installation: Must be installed by a qualified installer per the installation manual and local codes.

Downloads

• Installation & Owner's Manual (DVCD32FP / DVCD36FP / DVCD42FP)
• Homeowner's Manual (DVCD32FP / DVCD36FP / DVCD42FP)
• Download Brochures
• Download Architecture