Original price
$2,319.00
-
Original price
$2,319.00
Original price
$2,319.00
$2,319.00
-
$2,319.00
Current price
$2,319.00
| /
Free Shipping over $299
Please contact us directly to request quote for Empire products.
FREE SHIPPING : All Over United States over $299
SPEAK TO AN EXPERT : Call 888-486-2909 or email at cs@dreamwoodliving.com
Empire Boulevard Linear SL 30" Vent Free Gas Fireplace
The Empire Boulevard Linear SL 30" Vent Free Gas Fireplace features an elegant linear burner mounted between a matte-finished black full panel at the rear and a short tempered-glass deflector panel at the front. Aided by multiple reflections through the glass in front, the Boulevard SL creates a high-definition contrast between the flames and the black panel. With its clean lines and muted black finish, the Boulevard SL represents the last word in contemporary styling.
Every Boulevard SL includes an electronic intermittent ignition system that eliminates the standing pilot to help you save energy and money. The system includes a battery back-up switch to standing pilot to operate during power outages. The fireplace ships with an on/off wall switch to mount outside the fireplace. Upgrade to an optional wall thermostat, remote control thermostat, or even a programmable remote. Sized to fit in a stud wall, the Boulevard SL conceals its valve and control module below the burner. Openings in the casing let you route the gas supply from below, the side, or the back.
Shown with required decorative front (not included).
Features
Dimensions: 5.5" (D) x 30.25" (W) x 17.88" (H)
Includes:
Non-combustible Board (for full or partially recessed installation
On-Off Wall Switch with 10-ft Extension Wire
Battery Backup with 10-ft Extension Wire
Fine Mesh Barrier Screen
Requires:
Decorative Front for Surface Mount or Partially Recessed installation
Non-combustible material (tile/stone) for Partially Recessed and Fully Recessed installation
Electrical box for Wall Switch
Electrical box and cover for Battery Back-Up
This fireplace installs:
Surface mounted on any wall(No Framing). Order a decorative front and wrap accessory (Does not require non-combustible materials.)
Partially recessed in a 2 x 4 framed wall(18 x 30-3/4 x 3-1/2 inches). Use the included non-combustible board (finished with tile or stone) and order a decorative front accessory
Fully recessed in a 2 x 6 framed wall(29-1/2 x 30-3/4 x 5-1/2 inches). Use the included non-combustible board and apply tile or stone over the face
Fuel Type: Liquid Propane or Natural Gas
Venting Type: Vent-Free
Ignition:Intermittent Pilot Ignition
Shape: Linear
Weight: 50 lbs
Assembly Required:Required
Color Family:Black
BTU Max/Min
10,000 BTUs or less are required for a Bedroom Application
Bedroom units produce 10,000 BTUs
Standard application units produce 12,000 BTUs (LP) and 14,000 BTUs (NG)
Made in the USA
What to Order With It
Required for surface-mount installation (cabinet wrap and decorative front):
At just 5 1/2 inches deep the Boulevard SL is the first vent-free fireplace that can install fully in a 2 x 6 stud-framed wall. Add tile right up to the rectangular opening to create a stunningly beautiful, amazingly efficient clean-face fireplace. The optional trim kit finishes the opening and adjusts for different depths of tile or stone. Recessed installation requires installing the included non-combustible material above and to the sides of the fireplace, and tile or stone to the fireplace opening. The optional trim kit hides tile edges and adjusts from 1/2 to 1 inch.
Partially Recessed Installation
In a 2 x 4 framed wall, the Boulevard SL can install, partially in the wall and finish with one of two fronts. Partially recessed installation requires installing included non-combustible material above the fireplace, and a Mitered Decorative Front.
Surface-Mount Installation
With the available fireplace wrap, the Boulevard SL can be hung like a framed art on any wall – including brick, stone, or conventional drywall – and finished with a decorative front. Surface-Mount installation requires a Mitered Decorative Front and a Fireplace Cabinet Wrap (select both options for surface mount installation).
Narrow Trim is not required for the fully recessed installation, but helps dress out the fireplace opening. Adjusts from 1/2 to 1 inch depth
Warranty
All vent-free products carry a five-year limited warranty with a five-year limited labor warranty.
All remote controls and lighting systems carry a one-year limited warranty.
Refer to Owner’s Manual for complete warranty info.
Clearances to combustibles: 18" minimum above the fireplace opening; 6" minimum to side walls
Mantel clearance: Follow the mantel chart in the installation manual for any combustible mantel above the unit.
Venting: Vent-free. No chimney, flue or vent pipe is required.
Minimum room size: The room must have at least 50 cubic feet of volume per 1,000 Btu/hr of input (the manual's "unconfined space" rule). At maximum input that is at least 700 cubic feet for the natural gas standard model (14,000 Btu/hr), 600 cubic feet for the propane standard model (12,000 Btu/hr) and 500 cubic feet for the bedroom models (10,000 Btu/hr).
Bedrooms and bathrooms: The manual prohibits unvented fireplaces over 10,000 Btu/hr in a bedroom or bathroom and over 6,000 Btu/hr in a bathroom. Only the 10,000 Btu/hr models (VFSL30FP7010N/P) may go in a bedroom, subject to the room-size rule and local codes; no model may go in a bathroom. In the Commonwealth of Massachusetts, unvented propane and natural gas-fired space heaters are prohibited in bedrooms and bathrooms.
Gas input (BTU/hr): Standard models (VFSL30FP70): natural gas 14,000 max, propane 12,000 max. Bedroom models (VFSL30FP7010): 10,000 max on natural gas or propane.
Power: Intermittent pilot ignition runs on the included AC power adapter, which needs a 120V, 60Hz, 1 Amp supply. A battery pack with 4 AA batteries provides backup.
Installation: Must be installed by a qualified installer per the installation manual and local codes.
